My Blog

My WordPress Blog

How to Fix Bubbles in Peel and Stick Wallpaper

peel and stick wallpaper activator

4 Views

Peel and stick wallpaper is a quick and stylish way to transform your walls. However, one common problem people face is bubbles forming under the wallpaper during installation. These bubbles can ruin the smooth finish and detract from the overall look. Fortunately, fixing bubbles in peel and stick wallpaper is easy if you know the right techniques. Follow these steps to get a flawless finish:

Step 1: Identify the Bubbles

Carefully inspect your wallpaper for any bubbles or air pockets. Use natural light or shine a lamp across the surface to make them easier to spot. Mark the locations of the bubbles with a small piece of tape or a pencil to ensure you don’t miss any during the repair process.

Step 2: Smooth Out Small Bubbles

For small bubbles, try smoothing them out with a squeegee, credit card, or a soft cloth. Start at the center of the bubble and press outward toward the edges. Apply gentle but firm pressure to push the trapped air out.

Step 3: Poke and Release Air

If the bubble doesn’t flatten with smoothing, use a pin or a sewing needle to poke a tiny hole in the center of the bubble. This creates an opening for the trapped air to escape.

Step 4: Re-Smooth the Area

After releasing the air, smooth the wallpaper again using a squeegee or your hand. Start from the edges of the bubble and move toward the hole to press out any remaining air. The tiny pinhole will become nearly invisible once the area is smoothed.

Step 5: Apply Heat for Stubborn Bubbles

For larger or stubborn bubbles, apply a little heat to the area using a hairdryer on a low setting. The heat will soften the adhesive, making it easier to flatten the bubble. Be careful not to overheat the wallpaper, as this could damage the material.

Step 6: Remove and Reapply if Necessary

If a bubble is too large or won’t flatten, you may need to peel back the affected section and reapply it. Gently lift the wallpaper from the wall, smooth out the bubble, and press the wallpaper back in place. Work slowly to avoid creating new bubbles during reapplication.

Step 7: Prevent Bubbles During Installation

To avoid bubbles in the first place, take these precautions:

  • Clean the Wall: Make sure the surface is clean, dry, and free of dust or grease before applying the wallpaper.
  • Work Slowly: Peel off the backing paper gradually, pressing the wallpaper onto the wall as you go. Use a squeegee to smooth it down evenly.
  • Avoid Stretching: Handle the wallpaper gently to prevent stretching, which can cause bubbles.

Wrapping up

Bubbles in peel and stick wallpaper can be frustrating, but they’re easy to fix with the right tools like peel and stick wallpaper activator and proper techniques. By smoothing, poking, heating, or reapplying the wallpaper, you can achieve a perfect finish. Take your time during installation and follow the tips to prevent bubbles from forming in the first place. With a little patience and effort, your walls will look stunning and bubble-free!

Leave a Reply